Elimination Reactions

By James Ashenhurst

Elimination Reactions (2): The Zaitsev Rule

Last updated: April 4th, 2024 |

Elimination Reactions: The Zaitsev Rule

Elimination reactions usually occur such that they are removing a hydrogen from the carbon attached to the fewest hydrogens. 

This is called “Zaitsev’s rule”.

So when you form an alkene in an elimination reaction, make sure you form the most substituted alkene (i.e. the one with the most carbon atoms directly attached).

Another way of stating Zaitsev’s rule is that “the poor get poorer”. In other words, the carbon with the fewest hydrogens loses the hydrogen.

summary of zaitsev rule favorimg the most substituted product in elimination reactions to form alkenes

Table of Contents

  1. In Elimination Reactions, The “More Substituted” Alkene Tends To Be The Major Product
  2. The Stability Of Alkenes Increases As C-H Bonds Are Replaced With C–C Bonds
  3. The “Zaitsev Rule”: Elimination Will Occur Such That The Hydrogen Is Removed From The Beta-Carbon With The Fewest Hydrogens
  4. Notes
  5. (Advanced) References and Further Reading

1. In Elimination Reactions, The “More Substituted” Alkene Tends To Be The Major Product

So far, we’ve only looked at some simple elimination reactions where only one product is possible.  In this post we’ll look at some examples where we start to see some of the extra “wrinkles” that can be present in elimination reactions.

For example, if you heat the alcohol below with a strong acid (like sulfuric acid, H2SO4)  you obtain one major product (an alkene) and a minor product (also an alkene).

the Zaitsev rule is that when two or more alkene products are possible in a reaction the alkene with fewest attached hydrogens is major

What’s interesting about this? Well, if you look closely you should see that actually two elimination products are possible here, but only one is formed as the major product.

The alkene which is “tetrasubstituted” – that is, attached to four carbon atoms – is the major product, and not the “disubstituted” alkene, which is attached to two carbon atoms and two hydrogen atoms.

(The fact that we’re forming a new C-C π bond at the expense of sigma bonds on adjacent carbons is characteristic of elimination reactions.)

Similarly, look at the product of this next reaction. Taking an alkyl bromide and adding a strong base, we again get a “major” product and a “minor product”.

Zaitsev rule with cyclohexyl bromide and naoet gives trisubstituted product

Again, the major product is “more substituted” than the minor product. Of the 4 atoms directly attached to the alkene in the major product, 3 of them are carbon and 1 is hydrogen.  In the minor product,   2 carbon atoms and 2 hydrogen atoms are directly attached to the alkene.

So what’s responsible for this preference for the “more substituted” alkene in elimination reactions?

2. The Stability Of Alkenes Increases As C-H Bonds Are Replaced With C–C Bonds

Well, this correlates nicely with an observation that’s been made regarding the heats of formation of various alkenes. As an alkene becomes more substituted (i.e. more carbons attached, fewer hydrogens attached) it becomes more thermodynamically stable. [This observation comes from measuring the enthalpy of hydrogenation for various alkenes – click here for data] . [See post: Alkene Stability]

thermodynamic stability of alkenes increases as attached alkyl groups increase

This agrees nicely with the trend that’s observed for elimination reactions.  The major product of an elimination reaction tends to be the more substituted alkene. This is because the transition state leading to the more substituted alkene is lower in energy and therefore will proceed at a higher rate.

3. The “Zaitsev Rule”: Elimination Will Occur Such That The Hydrogen Is Removed From The Beta-Carbon With The Fewest Hydrogens

It was a Russian chemist named Alexander Zaitsev who published a paper making this observation back in the late 19th century, and therefore this observation has become known as Zaitsev’s Rule. Formally, the rule is that an elimination will occur such that a hydrogen is removed from the “β-carbon” with the fewest hydrogens.

[Organic chemists and their terms: the “α-carbon” is the carbon attached to the leaving group, while “β-carbons” are all carbons attached to the alpha carbon.]

zaitsev rule quote hydrogen removed from beta carbon with fewest hydrogens examples

In the next post, we’ll go into a little more detail as to why so many elimination reactions seem to have the word “heat” written under them.

Next Post: Elimination Reactions Are Favored By Heat


Notes


(Advanced) References and Further Reading

  1. Zur Kenntniss der Reihenfolge der Analgerung und Ausscheidung der Jodwasserstoffelemente in organischen Verbindungen
    Alexander Saytzeff
    Liebig. Ann. Chem. 1875, 179 (3), 296-301
    DOI:
    10.1002/jlac.18751790304
    The original paper by Alexander Saytzeff with his observations on elimination reactions, leading to the rule that now bears his name.
  2. The mechanism and kinetics of elimination reactions
    D. Hughes and C. K. Ingold
    Trans. Faraday Soc. 1941, 657-685
    DOI:
    10.1039/TF9413700657
    Section 3.2 in this paper discusses Zaitsev’s Rule. More observations are disclosed, and a possible explanation for the rule (based on hyperconjugation, or the ‘Baker-Nathan effect’) is provided.
  3. Mechanism of elimination reactions. Part XVI. Constitutional influences in elimination. A general discussion
    M. L. Dhar, E. D. Hughes, C. K. Ingold, A. M. M. Mandour, G. A. Maw and L. I. Woolf
    J. Chem. Soc. 1948, 2093-2119
    DOI:
    10.1039/JR9480002093
    This paper discusses in detail the differences in conditions and substrate that may cause an E2 reaction to give the Zaitsev or Hofmann product.
  4. Mechanism of elimination reactions. Part XI. Kinetics of olefin elimination from tert.-butyl and tert.-amyl bromides in acidic and alkaline alcoholic media
    M. L. Dhar, E. D. Hughes, and C. K. Ingold
    J. Chem. Soc. 1948, 2065-2072
    DOI:
    10.1039/JR9480002065
  5. Mechanism of elimination reactions. Part XIX. Kinetics and steric course of elimination from isomeric menthyl chlorides
    E. D. Hughes, C. K. Ingold, and J. B. Rose
    J. Chem. Soc. 1953, 3839-3845
    DOI:
    10.1039/JR9530003839
    This is an example of the Zaitsev rule in a cyclohexane system. Neomenthyl chloride gives 78% 3-menthene and 22% 2-menthene with EtO in ethanol.
  6. Mechanisms of Elimination Reactions. VI. The Effect of the Leaving Group on Orientation in E2 Reactions
    William H. Saunders, Susan R. Fahrenholtz, Edward A. Caress, John P. Lowe, and Madeline Schreiber

    Journal of the American Chemical Society 1965 87 (15), 3401-3406
    DOI: 10.1021/ja01093a020
    Very interesting study where 2-halogenopentanes are treated with potassium ethoxide at the boiling point. For leaving groups Cl, Br, and I the dominant elimination product was pent-2-ene (i.e. the Zaitsev product) in 64, 75, and 80% yield respectively. For fluorine, the non-Zaitsev product is formed preferentially! (82% vs 18%).

Comments

Comment section

17 thoughts on “Elimination Reactions (2): The Zaitsev Rule

  1. “This is because the transition state leading to the more substituted alkene is lower in energy and therefore will proceed at a higher rate”.
    There will be partial double bond between the carbon atoms in the Transition state, so how can we compare the stability of partial bonds?
    Can we compare them exactly in the same way as we usually compare stability of alkenes?

  2. You mentioned that elimination reactions require a base, but in the first example you use sulfuric acid instead whereas it is the substrate that seems to be basic at the OH group. What’s going on?

    1. Right. In the E1 reaction (which this is an example of) deprotonating the C-H bond adjacent to a carbocation does not require a strong base.

      In the case of H2SO4, it’s the water (H2O) leaving group that ends up acting as the base.

    1. Conjugation indeed plays a role in alkene stability, but this post focuses on the relationship between carbon substitution and alkene stability. It can be hard to predict situations where multiple variables are in play and conflict, such as deciding whether a tetrasubstituted non-conjugated alkene will form as opposed to a disubstituted conjugated alkene. Hence this post tries to keep things simple.

  3. Would you be able to include examples of when an elimination reaction is Anti-zaitsev’s? Is it only for bases that are strong and bulky (i.e. KOtBu, DBN or DBU)?

  4. Thank you so much! This is a lot clearer than my textbook. I’m finally starting to understand this stuff.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.